DIMENSIONS

47.24 x 23.62” (120 x 60 cm) panels come in sets of two. 23.62 x 23.62” (120 x 60 cm) panels come in sets of four. The number of panels per box is the minimum suggested amount to create the design envisioned by Mikodam.

INSTALLATION

The panels are mounted onto a rail system.

60x120 cm panels come with pre-inserted nuts at the corners on the back of the panel, ready to fix the Z-shaped profiles. Z-shaped profiles for 60x120 cm panels come separately. Using these pre-inserted nuts, Z-shaped profiles are fixed according to the direction of the panel to be hung.

The locations of the Z-shaped profiles are the same for all 60 x 120 panels so that if you change the panel with another 60 x 120 cm Mikodam panel you will not have to change the position of the U-shaped profile on the wall. You can also change the direction of the panels without changing the position of the U-shaped profiles.

While hanging the panels, for the panel at the bottom both lower and upper Z profiles should be used. For the panels above the first row, only Z profiles on the top are used.

Mikodam 3D wall panels present clever solutions to create your own spaces. Various combinations can be achieved with different color and material alternatives such as natural wood veneer (oak, walnut, teak), lacquer, fabric. Through rotations, material choices and using different lines together you can create different patterns and breath-taking interiors.

T3 can be used where high absorption is necessary. The panel in this form is effective for controlling reverberation and echo formation inside rooms designed for speech related activities due to higher absorption performance at mid-to-high frequencies. T4 is suited where absorption is necessary on wall surfaces and to tune optimum reverberation desired for a room. T6 can be used where medium absorption is demanded for low frequency range, especially suited for electroacoustic sound reinforcement with music material of dominant low-frequency energy content in such rooms.

Besides absorption, all configurations can provide effective sound scattering for the range of frequencies from 250 Hz to 2000 Hz due to variations in both depth and length of each element within the modules. This allows even distribution of sound within the room and prevents disturbance from acoustical defects such as harsh sound reflections, acoustical glare, echo or flutter echo.

CORNER IMPLEMENTATIONS